Elektra Beckum Mega 350 D User Manual

ENGLISH

• Drain condensate from pressure

vessel (29).

Caution!
The condensate contains oil

and must be disposed at a proper col-
lecting point.

• Check V-belt:

− Remove belt guard (30).
− Retension V-belt or replace, if

necessary.

− To adjust the V-belt tension,

loosen the four screws at the
motor base and shift the motor.

− Tighten the screws at the motor

base again.

− Replace the belt guard.

Every 250 operating hours

• Replace air intake filter element of

compressor pump.

• Replace air filter element of filter/

regulator unit.

Every 500 operating hours

• Drain oil from compressor pump

through the drain plug (28) and fill
with fresh oil.

Dispose of the waste oil envi-

ronmentally safe by taking it to a
proper collecting point!

Every 1000 operating hours

• Have unit serviced by an authorized

service station. This will extent the
compressor's service life considera-
bly.

5.2

Device storage

Switch unit OFF and unplug.

Release pressure from tank and all
connected air tools.

Store device in such way that it can-
not be started by unauthorized per-
sons.

Caution!
Do not store device unpro-

tected outdoors or in damp environ-
ment.
Do not lay device on its side for trans-
portation or storing.

For special applications the following
accessories are available at your spe-
cialist dealer – see back cover for illus-
trations:

Sealing
A

Air Caulking Gun KP 910
for commercially available car-
tridges.
Stock-no. 090 101 0030

Sheet metal cutting
B

Air Nibbler BN 540
extra small cutting radius; cuts steel
sheet up to 1.0 mm thickness.
Stock-no. 090 100 6784

Drilling
C

Air Drill BM 310
especially handy tool for low-fatigue
working; right-hand rotation only.
Stock-no. 090 100 6725

• Air Drill BM 500

(not illustrated) with 3/8" keyless
chuck, fully reversible with quick
reverse feature.
Stock-no. 090 105 4533

Stapling / nailing
D

Combination Air Stapler/Nailer
Kombi 40/50
for staples (type 90) from 20 mm to
40 mm and finishing nails (type
SKN) from 20 mm to 50.
Stock-no. 090 105 4720mm.

• Combination Air Stapler/Nailer

Kombi 40/50

for staples (type 90) from 15 mm to
32 mm and finishing nails (type
SKN) from 16 mm to 32.
Stock-no. 090 105 4711mm.

• Air Stapler KG 80/16

(not illustrated) for staples (type 80)
from 6 mm to 16 mm.
Stock-no. 090 105 4681

• Air Stapler KG 90/25

(not illustrated) for staples (type 90)
from 15 mm to 25 mm.
Stock-no. 090 105 4690

• Air Stapler KG 90/40

(not illustrated) for staples (type 90)
from 20 mm to 40 mm.
Stock-no. 090 105 4703

• Air Finish Nailer SKN 50

(not illustrated) for finishing nails
(type SKN) from 20 mm to 50 mm.
Stock-no. 090 105 4738

Spray painting
E

Spray Gun FB 2200 HVLP
high-volume low-pressure feature
reduces paint mist bounce-back
and provides thicker coating at less
paint consumption.
Stock-no. 090 105 4460

• Paint Spray Gun FB 2200

(not illustrated) with 0.5 l flow cup;
professional spray gun; steplessly
adjustable round, horizontal and
vertical spray pattern.
Stock-no. 090 105 4452

• Paint Spray Gun SB 200

(not illustrated) with 1.0 l siphon cup.
Stock-no. 090 100 3882

• Paint Spray Gun FB 150

(not illustrated) with 0.5 l flow cup;
for spraying primers and paints of
varying viskosity.
Stock-no. 090 100 3874

• Paint Spray Gun FB 90

(not illustrated) with 0.75 l flow cup;
for spraying primers and paints of
varying viskosity.
Stock-no. 090 105 6064

Chiselling
F

Air Hammer Set MHS 450
for construction and auto body work
Stock-no. 090 100 9210

• Air Hammer Set MHS 315

(not illustrated) to take off plaster
and tiles and for light chiselling
work.
Stock-no. 090 100 6911

Tyre inflating / checking
G

Tyre Inflator Gauge RF 480
professional version (calibrated).
Stock-no. 090 105 4630

• Tyre Inflator Gauge RF 363

(not illustrated) same as RF 480, but
not calibrated.
Stock-no. 090 105 4622

AUTO

O OFF

Available Accessories