Elektra Beckum Mega 500 W User Manual

ENGLISH

• Drain condensate from pressure

vessel (29).

• Clean air filter element (30) of filter/

regulator unit.

• Drain condensate from filter/regula-

tor unit (31).

• Check V-belt:

− Remove belt guard (32).
− Retension V-belt or replace, if

necessary.

− To adjust the V-belt tension,

loosen the four screws at the
motor base and shift the motor.

− Tighten the screws at the motor

base again.

− Replace the belt guard.

Every 250 operating hours

• Replace air intake filter element of

compressor pump.

• Replace air filter element of filter/

regulator unit.

Every 500 operating hours

• Drain oil from compressor pump

through the drain plug (28) and fill
with fresh oil.

Dispose of the waste oil envi-

ronmentally safe by taking it to a
proper collecting point!

Every 1000 operating hours

• Have unit serviced by an authorized

service station. This will extent the
compressor's service life considera-
bly.

5.2

Machine storage

Switch unit OFF and unplug.

Release pressure from tank and all
connected air tools.

Store machine in such way that it
cannot be started by unauthorized
persons.

Caution!
Do not store machine unpro-

tected outdoors or in damp environ-
ment.
Do not lay machine on its side for
transportation or storing.

For special applications the following
accessories are available at your spe-
cialist dealer – see back cover for illus-
trations:

Sealing
A

Air Caulking Gun KP 910
for commercially available car-
tridges.
Stock-no. 090 101 0030

Sheet metal cutting
B

Air Nibbler BN 540
extra small cutting radius; cuts steel
sheet up to 1.0 mm thickness.
Stock-no. 090 100 6784

Drilling
C

Air Drill BM 310
especially handy tool for low-fatigue
working; right-hand rotation only.
Stock-no. 090 100 6725

• Air Drill BM 500 (not shown)

with 3/8" keyless chuck, fully revers-
ible with quick reverse feature.
Stock-no. 090 105 4533

Stapling / nailing
D

Combination Air Stapler/Nailer
Kombi 40/50
for staples (type 90) from 20 mm to
40 mm and finishing nails (type
SKN) from 20 mm to 50 mm.
Stock-no. 090 105 4720

• Combination Air Stapler/Nailer

Kombi 32 (not illustrated)
for staples (type 90) from 15 mm to
32 mm and finishing nails (type
SKN) from 16 mm to 32 mm.
Stock-no. 090 105 4711

• Air Stapler KG 80/16 (not illustrated)

for staples (type 80) from 6 mm to
16 mm.
Stock-no. 090 105 4681

• Air Stapler KG 90/25 (not illustrated)

for staples (type 90) from 15 mm to
25 mm.
Stock-no. 090 105 4690

• Air Stapler KG 90/40 (not illustrated)

for staples (type 90) from 20 mm to
40 mm.
Stock-no. 090 105 4703

• Air Finish Nailer SKN 50 (not illus-

trated)
for finishing nails (type SKN) from
20 mm to 50 mm.
Stock-no. 090 105 4738

Spray painting
E

Spray Gun FB 2200 HVLP
High-volume low-pressure feature
reduces paint mist bounce-back
and provides thicker coating at less
paint consumption.
Stock-no. 090 105 4460

• Paint Spray Gun FB 2200

(not illustrated)
with 0.5 l flow cup; professional
spray gun; steplessly adjustable
round, horizontal and vertical spray
pattern.
Stock-no. 090 105 4452

• Paint Spray Gun SB 200

(not illustrated)
with 1.0 l siphon cup.
Stock-no. 090 100 3882

Available Accessories

O OFF

AUTO