Elektra Beckum Mega 350 W User Manual

12

ENGLISH

• Check V-belt: 

− Remove belt guard (30). 
− Retension V-belt or replace, if

necessary. 

− To adjust the V-belt tension,

loosen the four screws at the
motor base and shift the motor. 

− Tighten the screws at the motor

base again. 

− Replace the belt guard. 

• Replace air intake filter element of

compressor pump. 

• Replace air filter element of filter/

regulator unit. 

• Drain oil from compressor pump

through the drain plug (28) and fill
with fresh oil. 

A

• Have unit serviced by an authorized

service station. This will extent the
compressor's service life considera-
bly. 

1.

Switch unit OFF and unplug. 

2.

Release pressure from tank and all
connected air tools. 

3.

Store device in such way that it can-
not be started by unauthorized per-
sons. 

A

For special applications the following
accessories are available at your spe-
cialist dealer – see back cover for illus-
trations: 

Air Caulking Gun KP 910 
for commercially available car-
tridges. 
Stock-no. 090 101 0030 

Air Nibbler BN 540 
extra small cutting radius; cuts steel
sheet up to 1.0 mm thickness. 
Stock-no. 090 100 6784 

Air Drill BM 310 
especially handy tool for low-fatigue
working; right-hand rotation only. 
Stock-no. 090 100 6725 

• Air Drill BM 500 (not shown) 

with 3/8" keyless chuck, fully revers-
ible with quick reverse feature. 
Stock-no. 090 105 4533 

Combination Air Stapler/Nailer
Kombi 40/50
for staples (type 90) from 20 mm to
40 mm and finishing nails (type
SKN) from 20 mm to 50.
Stock-no. 090 105 4720mm. 

• Combination Air Stapler/Nailer

Kombi 32 (not illustrated)
for staples (type 90) from 15 mm to
32 mm and finishing nails (type
SKN) from 16 mm to 32.
Stock-no. 090 105 4711mm. 

• Air Stapler KG 80/16 

(not illustrated) 
for staples (type 80) from 6 mm to
16 mm. 
Stock-no. 090 105 4681 

• Air Stapler KG 90/25 

(not illustrated) 
for staples (type 90) from 15 mm to
25 mm. 
Stock-no. 090 105 4690 

• Air Stapler KG 90/40 

(not illustrated) 
for staples (type 90) from 20 mm to
40 mm. 
Stock-no. 090 105 4703 

• Air Finish Nailer SKN 50 

(not illustrated) 
for finishing nails (type SKN) from
20 mm to 50 mm. 
Stock-no. 090 105 4738 

Spray Gun FB 2200 HVLP 
high-volume low-pressure feature
reduces paint mist bounce-back
and provides thicker coating at less
paint consumption. 
Stock-no. 090 105 4460 

• Paint Spray Gun FB 2200 

(not illustrated) 
with 0.5 l flow cup; professional
spray gun; steplessly adjustable
round, horizontal and vertical spray
pattern. 
Stock-no. 090 105 4452 

• Paint Spray Gun SB 200 

(not illustrated) 
with 1.0 l siphon cup. 
Stock-no. 090 100 3882 

• Paint Spray Gun FB 150 

(not illustrated) 
with 0.5 l flow cup; for spraying prim-
ers and paints of varying viskosity. 
Stock-no. 090 100 3874 

• Paint Spray Gun FB 90 (not illus-

trated) 
with 0.75 l flow cup; for spraying
primers and paints of varying vis-
cosity. 
Stock-no. 090 105 6064 

Air Hammer Set MHS 450 
for construction and auto body work 
Stock-no. 090 100 9210 

• Air Hammer Set MHS 315 

(not illustrated) 
to take off plaster and tiles and for
light chiselling work. 
Stock-no. 090 100 6911 

Tyre Inflator Gauge RF 480 
professional version 
(calibrated). 
Stock-no. 090 105 4630 

• Tyre Inflator Gauge RF 363 

(not illustrated) 
same as RF 480, but not calibrated. 
Stock-no. 090 105 4622 

• Tyre Inflator Gauge RF 200 

(not illustrated) 
for inflating tyres and balls (cali-
brated). 
Stock-no. 090 105 6188 

• Tyre Inflator Gauge RF 100 

(not illustrated) 
same as RF 200, but not calibrated. 
Stock-no. 090 102 6724 

Blow Gun BP 200 
all plastic body. 
Stock-no. 090 105 4606 

• Blow Gun BP 300 (not illustrated) 

all plastic body; venturi nozzle pro-
vides extra high air volume. 
Stock-no. 090 105 4614