Campbell Hausfeld IN733300AV User Manual

Page of 8
Please read and save these instructions. Read carefully before attempting to assemble, install, operate or maintain the product described. 
Protect yourself and others by observing all safety information. Failure to comply with instructions could result in personal injury and/or 
property damage! Retain instructions for future reference.
For parts, product & service information
visit www.chpower.com
REMINDER: Keep your dated proof of purchase for warranty purposes! Attach it to this manual or file it for safekeeping.
IN733300AV 9/10
See Warranty on page 2 for important information about commercial use of this product.
Operating Instructions  
RP0700
© 2010 Campbell Hausfeld/Scott Fetzer
12-Volt Inflators
Description
The 12-volt inflator comes with an inflation 
nozzle and needle. The inflator can be used 
for emergency roadside tire inflation and to 
inflate bike tires, soccer balls, beach balls and 
other sporting equipment.
Unpacking
When unpacking this product, carefully 
inspect for any damage that may have 
occurred during transit.
Safety Guidelines
This manual contains information that is very 
important to know and understand. This 
information is provided for SAFETY and to 
PREVENT EQUIPMENT PROBLEMS. To help 
recognize this information, observe the 
following symbols.
 
Danger indicates  
  an imminently 
hazardous situation which, if not 
avoided, WILL result in death or serious 
injury.
 
Always use a  
  separate pressure 
gauge to check the actual pressure in 
tires and in low pressure inflatable 
objects.
 
Inflator must cool  
  for 20 minutes after 
20 minutes of continuous operation. 
The Inflator is not designed to operate 
continuously for more than 20 minutes.
 
Do not use inflator  
  on high pressure 
tires used on large trucks, trailers or 
tractors. The inflator is not designed to 
operate for the length of time necessary 
to inflate these tires.
 
Make sure the  
  adapter is properly 
connected to the valve stem.
Operation
Tires
1.    Remove valve stem cap.
2.    Turn the adapter onto the valve stem 
in a clockwise direction until a good 
connection is achieved (See Fig. 1).
3.    Plug power cord into 12-volt DC power 
outlet.
 
For use with 12-volt 
 DC power outlets 
rated 15 amps or higher. Do not use 
with older 8 amp cigarette lighter 
receptacles.
4.    Turn power switch on.
 
Warning indicates   
  a potentially 
hazardous situation which, if not 
avoided, COULD result in death or 
serious injury.
 
Caution indicates   
  a potentially 
hazardous situation which, if not 
avoided, MAY result in minor or 
moderate injury.
 
Notice indicates  
  important 
information, that if not followed, may 
cause damage to equipment.
General Safety
Completely read the manual 
included with this product 
carefully. Be thoroughly familiar 
with the proper use of the unit.
Any misuse of unit could 
cause property or equipment 
damage and / or personal 
injury.
CalIfORnIa PROPOSITIOn 65
 
This product or  
  its power cord may 
contain chemicals known to the State 
of California to cause cancer and birth 
defects or other reproductive harm. 
Wash hands after handling.
GeneRal SafeTy
 
Do not  leave the 
  inflator unattended 
while the unit is running.
Never exceed the 
recommended pressure for 
any inflatable object. Do 
not over inflate objects. Over inflation 
could cause property damage and/or 
personal injury.
 
The adapter 
  must be properly 
connected to secure the inflation 
accessories. Use extreme caution when 
using inflation accessories.
 
Always  put the 
  car in park; set the 
emergency brake; and chock the wheels 
before using the inflator or property 
damage and/or personal injury could 
occur.
Specifications
Max Pressure . . . . 150 psi
Features . . . . . . . . Built-in Pressure Gauge
 
Compact Size
 
Cooling Fan
 
Safety Light
Weight . . . . . . . . . 2.0 lbs.
Voltage  . . . . . . . . 12V, DC
Air Outlet. . . . . . . High Pressure Chuck
Fuse  . . . . . . . . . . . 10 amp
MANUAL
Pressure 
Gauge
Power Switch / 
Light Switch
Power Cord
Light
Model RP0700
figure 1
Lock
Valve Stem
Universal 
Adapter
Open