Datalogic Scanning 1000 User Manual

SOFTWARE CONFIGURATION 

Parameters to verify/modify: 

 

 Operating mode 

Sets the parameters which customize the reader operating 
mode starting from three main modes: 

One-shot: acquires a single image based on the selected 
value for the Acquisition Trigger and Delayed Triggers. 

Continuous: continuously acquires images with a rate up to 
30 frames per second depending on the decoding time. 

Phase Mode: acquires images during the reading phase 
depending on the selected value for the Acquisition Trigger 
and Delayed Triggers. The Phase-ON and Phase-OFF 
events mark respectively the beginning and end of the 
reading phase. 

 Calibration 

Calibrates the acquisition parameters to maximize the 
reading performance (see par. 3.4.2) 

 Communication 

Configures the parameters relative to each serial port 
regarding the transmission, message formatting and string 
receiving. 

Any change to the VisiSet™ communication port 
parameters (baud rate, data bits, etc.) is effective as soon 
as the reader is disconnected from VisiSet™.

 

 Decoding 

Sets the decoding parameters shared by several code 
symbologies. 

 1D & 2D, Postal 

Codes 

Sets the characteristics of the code symbologies to be read. 

 Data Collection 

Defines the code-collection parameters and the output 
message format. 

 Digital I/O 

Configures the reader input/output parameters. 

 Verifier 

Sets the verifier mode to compare the read code to a user-
defined database.

 

 Miscellaneous 

Sets the reader name and the saved image format.