Datalogic Scanning MX30 User Manual
GRYPHON™ Dx30/Mx30
4
5.
Read the Bind code to pair the Gryphon™ Mx30 to the OM-Gryphon™ cradle.
The reader is dedicated to the cradle. Any previously bound reader will be
excluded.
To connect several readers to the same cradle see the following paragraph
4.4.1, ‘Using Multiple M Series Readers with Same Cradle'.
The reader is dedicated to the cradle. Any previously bound reader will be
excluded.
To connect several readers to the same cradle see the following paragraph
4.4.1, ‘Using Multiple M Series Readers with Same Cradle'.
Bind
Ì$+RN0$-IÎ
The green LED on the Gryphon™ Mx30 will blink; the reader is ready to be
positioned onto the cradle.
positioned onto the cradle.
6.
Firmly position the reader onto the OM-Gryphon™ cradle within 10 seconds, a
beep will be emitted, signaling that the OM-Gryphon™ cradle has been paired
to the Gryphon™ Mx30, and the green LED on the reader will go off.
beep will be emitted, signaling that the OM-Gryphon™ cradle has been paired
to the Gryphon™ Mx30, and the green LED on the reader will go off.
Green LED
Read the OM-Gryphon™ restore default code:
7.
Restore OM-Gryphon™ default
Ì$+RX0$-qÎ
16