Datalogic Scanning QD2100 User Manual

Scanning Features

Selects the scan operating mode for the reader. Selections are:

When the trigger is pulled, scanning is activated until one of the fol-

lowing occurs:

-

Scanning Active Time

 has elapsed

- a label has been read
- the trigger is released

This mode is associated with typical handheld reader operation: when the trigger is 
pulled, scanning starts and the product scans until the trigger is released, or a label is read, 
or the maximum 

Scanning Active Time

 has elapsed.

When the trigger is pulled, scanning starts and the product 

scans until the trigger is released or 

Scanning Active Time

 has elapsed. Reading a label does 

not disable scanning. 

Double Read Timeout

 prevents undesired multiple reads of the same 

label while in this mode.

When the trigger is pulled, continuous scanning is activated 

until

Scanning Active Time

 has elapsed or the trigger has been released and pulled again. 

Double Read Timeout

1

 prevents undesired multiple reads of the same label while in this 

mode.

The reader flashes

1

 on and off regardless of the trigger status. Flash rate is 

controlled by 

Flash On Time

 and 

Flash Off Time

. When Flash is ON the imager reads con-

tinuously. When Flash is OFF scanning is deactivated.

No trigger pull is required to read a barcode. Scanning is continually on. 

If the trigger is pulled, the reader acts as if it is in 

Trigger Single

 Mode. 

Double Read 

Timeout

1

 prevents undesired multiple reads of the same label while in this mode.

No trigger pull is required to read a barcode. Scanning is turned on au-

tomatically when an item is placed in reader’s field of view. If the trigger is pulled, the 
reader acts as if it in single read mode. 

Double Read Timeout

1

 prevents undesired multiple 

reads of the same label while in this mode.

This mode is similar to Stand Mode, except that a trigger pull 

is required to activate the decoder.

1. Controlled by 

Flash On Time

.