Datalogic Scanning QD2100 User Manual

Parity

This feature specifies parity required for sending and receiving data. A parity check bit is 
the most significant bit of each ASCII coded character. Select the parity type according 
to host device requirements.

•

Select None when no parity bit is required.

•

Select Odd parity and the parity bit value is set to 0 or 1, based on data, to ensure that an 
odd number of 1 bits are contained in the coded character.

•

Select Even parity and the parity bit value is set to 0 or 1, based on data, to ensure that an 
even number of 1 bits are contained in the coded character.

ENTER/EXIT PROGRAMMING MODE

Parity = None

Parity = Even

Parity = Odd

DEFAULT