Avaya 8400B Plus User Manual
Dial Modifiers
Issue 2 November 1996
B-3
Dial Modifier:
P
Function:
Request to make a voice call.
S-Register:
S6
Example:
ATDP9, 9570000
Comments:
The purpose of the
P
dial modifier is to signal the 8400B
Plus Data Module to dial the number that follows as a
voice call. When entered immediately after the
voice call. When entered immediately after the
D
in a
dial command and/or as the first character in a stored
number, the 8400B Plus Data Module will place a voice
call. When the
number, the 8400B Plus Data Module will place a voice
call. When the
P
is omitted or the
T
is used, the 8400B
Plus Data Module will place a data call. When the
P
is
entered after the
D
and a stored number is dialed, a
voice call is made even if the first character of a stored
number is the
number is the
T
dial modifier. The blind dial S-register
(
S6
) is used to delay between going off-hook and
dialing the first digit.
See Also:
"Voice Operations" on page 3-18 and S-register
S6
on
page C-13.
Table B-1.
Dial Modifiers — Continued
Label
Description