Lexmark 560n User Manual
5
Press
or
repeatedly until Nearest Size appears, and then press OK.
6
Press
repeatedly until Select Function appears.
Unexpected page breaks occur
1
Make sure the printer is on and Select Function appears.
2
From the printer control panel, press System.
3
Press
or
repeatedly until Admin Menu appears, and then press OK.
4
Press
or
repeatedly until System Settings appears, and then press OK.
5
Press
or
repeatedly until Time-Out appears, and then press OK.
6
Press
or
repeatedly until On appears, and then press OK.
7
Press
or
repeatedly to adjust the time, or use the keypad to enter a value, and then press OK.
8
Press
or
repeatedly to adjust the time, or use the keypad to enter a value, and then press OK.
9
Press
repeatedly until Select Function appears.
Solving copy problems
Copier does not respond
These are possible solutions. Try one or more of the following:
A
RE
THERE
ANY
ERROR
MESSAGES
ON
THE
DISPLAY
?
Clear any error messages.
C
HECK
THE
POWER
Make sure the printer is plugged in, the power is on, and Select Function appears.
Scanner unit does not close
Make sure there are no obstructions:
1
Lift the scanner unit.
2
Remove any obstruction keeping the scanner unit open.
3
Lower the scanner unit.
Poor copy quality
These are some examples of poor copy quality:
•
Blank pages
•
Checkerboard pattern
•
Distorted graphics or pictures
Troubleshooting
175