Lexmark 560n User Manual

The printer is certified in the U.S. to conform to the requirements of DHHS 21 CFR Subchapter J for Class I (1) laser
products, and elsewhere is certified as a Class I laser product conforming to the requirements of IEC 60825-1.

Class I laser products are not considered to be hazardous. The printer contains internally a Class IIIb (3b) laser that is
nominally a 5 milliwatt gallium arsenide laser operating in the wavelength of 770-795 nanometers. The laser system
and printer are designed so there is never any human access to laser radiation above a Class I level during normal
operation, user maintenance, or prescribed service condition.

A laser notice label may be affixed to this printer as shown:

The following table documents the power consumption characteristics of the product.

Note: Some modes may not apply to your product.

Printing

The product is generating hard-copy output from electronic
inputs.

400 W

Copying

The product is generating hard-copy output from hard-copy
original documents.

420 W

Scanning

The product is scanning hard-copy documents.

110 W

Ready

The product is waiting for a print job.

90 W

Power Saver

The product is in energy-saving mode.

<17 W

High Off

The product is plugged into a wall outlet, but the power switch
is turned off.

N/A

Low Off (<1 W Off) The product is plugged into a wall outlet, the power switch is

turned off, and the product is in the lowest possible power
consumption mode.

N/A

Off

The product is plugged into a wall outlet, but the power switch
is turned off.

N/A

The power consumption levels listed in the previous table represent time-averaged measurements. Instantaneous
power draws may be substantially higher than the average.

Values are subject to change. See www.lexmark.com for current values.

Notices