Lexmark 560n User Manual

Open a Web browser.

In the address bar, type the IP address of the printer, and then press Enter.

If the Java applet screen appears, click Yes.

Click Address Book.

Under Server Address Book, click Individual Directory.

In the Directory Listing, click Add for any blank address.

Fill in the information for the computer:

In the Name field, enter the name that you want this address to appear under in the Address Book.

From the Server Type drop-down list, select SMB.

In the Server Address field, enter the IP address of the destination computer.

The port number needs to be specified only if the server is not using the default port.

In the Login fields, enter the name and password used to log in to the destination computer.

In the Share Name field:

If you are using Windows, type the share name of the shared destination folder.

If you are using a Macintosh computer, type your short name.

In the Server Path field:

If you are using Windows, specify any subfolders of the shared destination folder. If there are no subfolders,
leave this field blank.

If you are using a Macintosh computer, type Public\foldername, where foldername is the destination folder.

Click Save Changes to create the address.

Before you set up scanning to a computer, make sure that:

You have completed the initial setup of the printer.

The printer and computer are connected to your network with the appropriate type of cable.

You reset the printer by turning it off and then back on.

Confirm the printer IP Address by printing a configuration page:

Make sure the printer is on and Select Function appears.

From the printer control panel, press System.

Press 

 or 

 repeatedly until Information Pages appears, and then press OK.

Press 

 or 

 repeatedly until Configuration appears, and then press OK.

After the configuration page prints, Select Function appears.

Locate the IP Address on the configuration page.

Confirm the computer IP Address:

Scanning