GE 994-0089 User Manual
GE
Energy
D400 Substation Data Manager User's Manual
39
3.8
4-Port Twisted-Pair Ethernet Switch
The 4-Port Twisted-Pair Ethernet Switch (GE Part No. 520-0213) is a 10/100BaseT network
switch that plugs into the NET1 or NET2 slot (slots 11 and 12) on the D400. It provides
local area network connections for up to five Ethernet connections: four RJ-45
connectors on the rear panel and one RJ-45 connector on the front panel.
If two Ethernet switches are installed in the NET slots, the D400 may be used in a dual-IP
redundancy mode. That is, each switch can be configured with a different IP address to
provide a backup network connection if the primary channel fails.
See section “4.7 Network Connections” for typical cable connections.
switch that plugs into the NET1 or NET2 slot (slots 11 and 12) on the D400. It provides
local area network connections for up to five Ethernet connections: four RJ-45
connectors on the rear panel and one RJ-45 connector on the front panel.
If two Ethernet switches are installed in the NET slots, the D400 may be used in a dual-IP
redundancy mode. That is, each switch can be configured with a different IP address to
provide a backup network connection if the primary channel fails.
See section “4.7 Network Connections” for typical cable connections.
Configuration Options
There are no selectable options on the 4-Port TP Ethernet card.
4-Port Twisted-Pair Ethernet Switch Card