HP (Hewlett-Packard) 2405 (Q3086A) User Manual

hp psc 2400 series

chapter 2

16

Slide the paper-length and paper-width guides inward against the stack of 
cards until they stop.
Make sure the cards fit within the tray (do not overload it). The stack 
should be no higher than the top of the paper-width guide.

Replace the output tray.

If you want the best print quality, HP recommends HP papers. Using paper that 
is too thin, paper that has a slick texture, or paper that stretches easily can cause 
paper jams. Using paper that has a heavy texture or does not accept ink can 
cause printed images to smear, bleed, or not fill in completely. For more 
information about HP Premium Inkjet papers, go to the HP website:

The following table provides guidelines for loading certain types of paper and 
transparency film. For best results, adjust the paper settings each time you 
change paper sizes. For more information, see 

HP papers

HP Premium Paper: Locate the gray arrow on the nonprinting side 
of the paper, and then insert paper with the arrow side facing up.

HP Premium Inkjet Transparency Film: Insert the film so that the 
white transparency strip (with arrows and the HP logo) is on top 
and is going into the input tray first.

HP Iron-On Transfer: Flatten the transfer sheet completely before 
using it; do not load curled sheets. (To prevent curling, keep 
transfer sheets sealed in the original package until you are ready 
to use them.) Manually feed one sheet at a time, with the 
unprinted side facing down (the blue stripe faces up).

HP Matte Greeting Cards, HP Glossy Greeting Cards, or 
HP Textured Greeting Cards: Insert a small stack of HP greeting-
card paper, with the print side down, into the input tray until it 
stops.