HP (Hewlett-Packard) 2405 (Q3086A) User Manual

hp psc 2400 series

chapter 9

80

Wash the backing gently to loosen debris; do not scrub the backing.

Dry the backing with a chamois or soft cloth.

Do not use paper-based wipes as these might scratch the 

backing.

If this does not clean the backing well enough, repeat the previous steps 
using isopropyl (rubbing) alcohol, and wipe the backing thoroughly with a 
damp cloth to remove any residual alcohol.

Use a soft cloth or slightly moistened sponge to wipe dust, smudges, and stains 
off the case. The interior of the HP PSC does not require cleaning. Keep fluids 
away from the interior of the device as well as the front panel.

To avoid damage to painted parts of the HP PSC, do not use alcohol 

or alcohol-based cleaning products on the front panel or the lid of the 
HP PSC.

To ensure the best print quality from your HP PSC, you will need to perform some 
simple maintenance procedures and, when prompted by a front panel message, 
replace the print cartridges.

This section contains the following topics:

You can easily check the ink supply level to determine how soon you might need 
to replace a print cartridge. The ink level supply shows an approximation of the 
amount of ink remaining in the print cartridges. Checking the ink levels can only 
be done from the HP Photo & Imaging Director (HP Director).

From the 

, choose 

, choose 

, and then 

choose 

. 

Click the 

 tab.

The estimated ink levels appear for the print cartridges.