Lanier 5813 User Manual
Troubleshooting
192
6
B Loading Paper
Reference
For details about paper sizes that can be set,
For details about paper sizes that can be set,
⇒ P.235 “Mainframe”.
Note
❒ If you want to change the paper size, ⇒ P.207 “Changing Paper Size”.
Non-recommended Paper for Paper Trays
• Folded, curled, creased, or damaged paper
• Torn paper
• Perforated paper
• Paper with conductive or low electrical resistance coating such as carbon or
• Torn paper
• Perforated paper
• Paper with conductive or low electrical resistance coating such as carbon or
silver coating
• Thermal paper, art paper
• Thin paper that has low stiffness
• Damp paper
• Wavy paper
• Stapled paper
• Translucent paper
• OHP transparencies
• Thin paper that has low stiffness
• Damp paper
• Wavy paper
• Stapled paper
• Translucent paper
• OHP transparencies
Note
❒ Load paper with the side you wish to copy onto face-down in the paper trays.
If copies are curled, try turning the copy paper over in the tray. If there is no
improvement, change to copy paper with less curl.
improvement, change to copy paper with less curl.
❒ Correct curls in copy paper before loading.
❒ Fan copy paper to get air between the sheets before loading.
❒ When making 2-sided copies, do not load paper in the paper tray to copy on
❒ Fan copy paper to get air between the sheets before loading.
❒ When making 2-sided copies, do not load paper in the paper tray to copy on
the reverse side. Use the bypass tray.
⇒ P.49 “Copying onto the reverse side of
paper”.
Cattleya2-2_FM.book Page 192 Thursday, December 14, 2000 8:17 PM