Lanier 5813 User Manual
Basics
24
1
Placing Custom Sized Originals
When copying from custom sized originals, enter the original size so that the
copy is well aligned.
copy is well aligned.
Limitation
❒ You must place your custom size originals on the exposure glass.
Reference
For details about the standard sizes the machine can detect,
For details about the standard sizes the machine can detect,
⇒ P.16 “Standard
Size Originals”.
Note
❒ The dimensions you can enter must be within the following ranges:
A
Select the copy paper size.
B
Press the [Custom Size Orig.] key.
C
Make sure that the [Orig. Horiz.] key is selected. Enter the horizontal size
with the number keys, and then press the [#] key.
with the number keys, and then press the [#] key.
Note
❒ To change the value entered, press the [Clear] key, and then enter a new
value.
Vertical size
50 - 297mm (in 1mm steps), 2.0" - 11.7" (in 0.1" steps)
Horizontal size
50 - 432mm (in 1mm steps), 2.0" - 17" (in 0.1" steps)
Cattleya2-2_FM.book Page 24 Thursday, December 14, 2000 8:17 PM