Lanier 5505 User Manual
What to do if Something Goes Wrong
266
5
The
[Connect]
key does not
appear on the display.
The master unit is in Preset
Jobs mode.
Jobs mode.
Exit Preset Jobs mode in
one of the following ways.
one of the following ways.
❖
If you are still selecting
copy settings and
copying has not started
yet :
copy settings and
copying has not started
yet :
Press the
[Clear]
key
then remove the origi-
nals set in the master
unit document feeder.
nals set in the master
unit document feeder.
❖
If Preset Jobs mode is
in progress :
in progress :
Press the {
Stop
} key,
follow the instructions
on the display then
press the
on the display then
press the
[Cancel]
key.
Reference
See “Preset Jobs”
The
[Connect]
key does not
appear on the display.
The “Connect Copy” of
User Tools setting is set to
“No”.
User Tools setting is set to
“No”.
Change the setting to
“Yes” or press the
“Yes” or press the
[Con-
nect]
key on the other unit.
Reference
See “Connect Copy”
The Connect Copy cable is
damaged.
damaged.
Please contact your service
representative.
representative.
L indicator is lit.
Follow the instructions
shown on the display.
shown on the display.
Machine Status
Cause
Action