Mentor v8.6_4 User Manual
Command Dictionary
Step
FastScan and FlexTest Reference Manual, V8.6_4
2-615
Step
Tools Supported: FlexTest
Scope: Setup mode.
Usage
STEp [integer] [-Record [integer]]
Description
Single-steps through several cycles of a test set.
The Reset State, Set Pattern Source and Set System Mode commands will reset
the cycle count such that the next STEp command will start from the beginning of
the external test set.
the cycle count such that the next STEp command will start from the beginning of
the external test set.
Arguments
•
integer
Specifies the number of cycles to be simulated. This number indicates a
window of cycles to be simulated. The first cycle to be simulated is the cycle
after the one last simulated.
window of cycles to be simulated. The first cycle to be simulated is the cycle
after the one last simulated.
The default for integer is one global cycle.
•
-Record
An optional switch used to record several cycles of simulation data which can
be displayed later with the REPort GAte command.
be displayed later with the REPort GAte command.
Related Commands