Mentor v8.6_4 User Manual

FastScan and FlexTest Reference Manual, V8.6_4

Tools Supported: FastScan and FlexTest

Scope: Setup mode

WRIte NEtlist filename [-Edif | -Tdl | -Verilog | -VHdl | -Genie | -Ndl | -Model]

[-Replace]

Writes the modified or new format netlist to the specified file.

The Write Netlist command writes the netlist that is read into the system when
you invoked FastScan or FlexTest. If you do not specify one of the netlist format
options, then by default, the tool uses the format that you specified when you first
invoked.

This command is useful when translating verilog libraries into ATPG library
format.

•

A required string that specifies the name of the file to which FastScan or
FlexTest writes the netlist.

•

-Edif

An optional switch specifying to write the netlist in the EDIF format.

•

-Tdl

An optional switch specifying to write the netlist in the TDL format.

•

-Verilog

An optional switch specifying to write the netlist in the Verilog format.

•

-VHdl

An optional switch specifying to write the netlist in the VHDL format as
supported by the tool and described under “

” in the Design-for-

Test: Common Resources Manual.