Panasonic UF-7200 User Manual

25

Installing Your Machine

1

NOTE

Plug one end of the Telephone
Line Cable into the telephone
jack supplied by the telephone
company and the other end into
the LINE jack on the back of
the machine.

(Optional G3 Communication Port Kit 
    (UE-407029) is required.)

Connect the Telephone Line Cable from the 
Optional Handset Kit into the HANDSET
jack on the back of the machine.

You can connect an additional standard
single line telephone to the machine.
To connect a telephone,
remove the protective tab on the TEL jack.

or

RJ-11C
Telephone Jack

(Service use only)

POWER

(Some models may have 
  the Power Switch.)

(For Document Management 

See Operating Instructions 

System)

Insert the plug until a click is heard.
(LAN cable is not included with the product.)
Purchase a Category 5 Cable, compliant with
EIA/TIA 568-A-5 standard.

Power Cord (Included)

Handset Kit (Optional)

 (UE-403185)

Illuminates when connected 
to the LAN.
Lamp will not turn ON if LAN 
cable is defective (contains breaks).

Blinks when there is data
traffic on the LAN.