Panasonic UF-7200 User Manual

Problem Solving

Mode

Symptom

Cause / Action

Page

Transmission Copy
Quality

Vertical lines on the
transmitted
document

Check own copy quality. If copy is OK, your machine has no
problem, report to the receiving party that they have a
problem. If copy is NG, clean the Document Scanning Area.
(Refer to the Operating Instructions (For Advanced
Operations) on the provided CD-ROM.)

Transmitted
document is blank

1. Make sure the document is set face up.
2. Check own copy quality. If copy is OK, your machine has

no problem, report to the receiving party that they have a
problem. If copy is NG, clean the Document Scanning
Area.

32
--

Print Copy Quality

Vertical lines printing
on the received
document

1. Print out a Journal report (e.g.FUNCTION, 6, 1, SET and 1)

and check quality to make sure whether your machine has
trouble. (Refer to the Operating Instructions (For Advanced
Operations) on the provided CD-ROM.)
If Journal report quality is OK, your machine has no
problem, report to the sending party that they have a
problem.

2. Journal report quality is NG, replace the Toner Cartridge.

Fuzzy print

1. Make sure you are using the correct paper for the best

possible print quality.
(Refer to the Operating Instructions (For Advanced
Operations) on the provided CD-ROM.)

2. Try reversing the recording paper to the other side.

Missing dots or lines/
inconsistent
darkness within print

1. Make sure you are using the correct paper for the best

possible print quality.
(Refer to the Operating Instructions (For Advanced
Operations) on the provided CD-ROM.)

2. Replace the Toner Cartridge.

Fading print

Your Toner Cartridge may be running out of toner. Replace
the Toner Cartridge.

Faint print

You may need to choose a different paper for the best
possible print quality.
(Refer to the Operating Instructions (For Advanced
Operations) on the provided CD-ROM.)

Communication

No dial tone

1. Check the connection of the telephone line.
2. Check the telephone line.

No auto answer

1. Check the connection of the telephone line.
2. Check the Reception mode setting.
3. If the Fax Parameter No.13 (AUTO JOURNAL PRINT) is

set to "2:Valid" (default setting) and the machine is printing
the received document from memory, which also happens
to be the 200th transaction, the machine will not auto
answer until the Transaction Journal completes printing.
(Refer to the Operating Instructions (For Advanced
Operations) on the provided CD-ROM.)

25
--
--

Cannot transmit or
receive

An information code will be shown on the display. Refer to
the information code table to find out the trouble.

No Unit Operation

No unit operation

To reset the machine, first unplug the power cord of the
machine from the wall outlet. Wait for a few seconds and
plug the power cord of the machine in the wall outlet again.