Manualsbrain.com
  1. Manuals
  2. Brands
  3. Panasonic
  4. KX-FLB811
  5. User Manual

Panasonic KX-FLB811 User Manual

Download
Page of 106
3. Fax
35
8
Press {STOP} to exit.
3.6.4 Sending the same 
document to pre-programmed 
parties
L
Make sure that the {FAX} light is ON.
1
Insert the document FACE UP into the 
feeder.
L
Confirm that there are no documents 
on the scanner glass.
2
If necessary, change to the desired 
resolution (page 28) and the desired contrast 
(page 28).
3
Press the desired {BROADCAST} (1-2) or 
{
MANUAL BROAD}.
L
The document will be fed into the unit and 
scanned into memory. The unit will then 
send the data to each party, calling each 
number sequentially.
L
After transmission, the stored document 
will be erased from memory 
automatically, and the unit will 
automatically print a report (broadcast 
sending report).
Note:
L
Do not open the document cover when 
sending a fax with the auto document feeder.
L
If you select “
FINE”, “SUPER FINE” or 
“
PHOTO” resolution, the number of pages 
that the unit can send will decrease.
L
If the document exceeds the memory 
capacity, sending will be canceled.
L
If a party is busy or does not answer, it will be 
skipped and redialed later 1 time.
To send the same document using the 
scanner glass
L
Confirm that there are no documents in 
the auto document feeder.
1. Open the document cover.
2. Place the document FACE DOWN, then 
close the document cover.
3. Press the desired {BROADCAST} (1-2) or 
{
MANUAL BROAD}.
L
To send a single page, skip to step 6.
L
To send multiple pages, go to the next 
step.
4. Place the next page.
5. Press {SET}.
L
To send more pages, repeat steps 4 and 
5.
6. Press {START}.
To cancel broadcast transmission
1. Press {STOP} repeatedly until “
SEND 
CANCELED?” is displayed.
2. Press {SET}.
Receiving Faxes
FLB811-PFQX2307ZB-en.book  Page 35  Thursday, February 16, 2006  3:57 PM