Panasonic KX-FLB811 User Manual
8. Programmable Features
62
Sending a fax at a specific
time
{#}{
time
{#}{
4}{1}{2}
This feature allows you to take advantage of low-cost calling hours
offered by your telephone company. This feature can be set up to 24
hours in advance of the desired time.
{
offered by your telephone company. This feature can be set up to 24
hours in advance of the desired time.
{
0} “
OFF” (default)
{
1} “
ON”
To send a document:
1. If the {FAX} light is OFF, turn it ON by pressing {FAX}.
2. Insert the document into the auto document feeder.
3. If necessary, change to the desired resolution (page 28) and the
desired contrast (page 28).
4. Press {MENU}.
5. Press {#}, then {4}{1}{2}.
6. Press {1} to select “
ON”.
7. Press {SET}.
8. Enter the fax number.
L
To enter an item using one-touch dial feature and navigator
directory, see step 4 on page 33. (When using navigator
directory, you do not have to press {DIRECTORY} before
pressing {V} or {^}.)
directory, see step 4 on page 33. (When using navigator
directory, you do not have to press {DIRECTORY} before
pressing {V} or {^}.)
9. Press {SET}.
10. Enter the transmission start time.
L
Press {*} repeatedly to select “
AM” or “PM”.
11. Press {SET}.
L
The document will be fed into the unit and scanned into
memory. The unit will then send the data at the specified time.
memory. The unit will then send the data at the specified time.
Note:
L
To cancel after programming, press {STOP} then {SET}.
L
You can also send a document using the scanner glass. Press
{
{
SET} in step 11, then press {START}.
Setting the Error
Correction Mode (ECM)
{#}{
Correction Mode (ECM)
{#}{
4}{1}{3}
This feature is available when the sending / receiving fax machines are
ECM compatible.
{
ECM compatible.
{
0} “
OFF”: Deactivates this feature.
{
1} “
ON” (default): If there is an error during fax transmission /
reception, the unit will support the communication.
Setting the connecting
tone
{#}{
tone
{#}{
4}{1}{6}
If you often have trouble when sending faxes, this feature allows you to
hear connecting tones: fax tone, ring back tone and busy tone. You
can use these tones to confirm the status of the other party’s machine.
{
hear connecting tones: fax tone, ring back tone and busy tone. You
can use these tones to confirm the status of the other party’s machine.
{
0} “
OFF”: Deactivates this feature.
{
1} “
ON” (default): You will hear connecting tones.
Note:
L
If the ring back tone continues, the other party’s machine may not
be a fax machine or may have run out of paper. Check with the
other party.
be a fax machine or may have run out of paper. Check with the
other party.
L
The connecting tone volume cannot be adjusted.
Activating the Distinctive
Ring feature
{#}{
Ring feature
{#}{
4}{3}{0}
{
0} “
OFF” (default)
{
1} “
ON”
See page 42 for details.
Feature/Code
Selection
FLB811-PFQX2307ZB-en.book Page 62 Thursday, February 16, 2006 3:57 PM