Panasonic KX-MB3150CX User Manual
10. Useful Information
85
10.3 Cancelling the operations
You can cancel the current operation from the unit. You
can also select the desired operation to cancel.
can also select the desired operation to cancel.
1
{
Stop}
L
The current operation will be cancelled.
L
If the operation is not cancelled, go to step 2.
2
When a cancel confirmation message is
displayed:
displayed:
Press {Set} to cancel the operation.
When some operations are displayed:
Press {V} or {^} repeatedly to select the operation
that you want to cancel. i {Set}
that you want to cancel. i {Set}
Option
10.4 Lower input tray (optional)
You can add a lower input tray. See page 10 for
accessory information.
accessory information.
The lower input tray can hold:
–
–
Up to 520 sheets of 75 g/m
2
paper.
–
Up to 470 sheets of 80 g/m
2
paper.
–
Up to 410 sheets of 90 g/m
2
paper.
L
The unit is set for printing A4-size thin paper by
default.
–
default.
–
–
To use plain paper, change the recording
paper type setting (feature #383 on page 65).
paper type setting (feature #383 on page 65).
Important:
L
Before starting installation of the lower input
tray, be sure to turn the power switch OFF. For
more details about the installation, please refer
to the installation guide for the lower input tray.
tray, be sure to turn the power switch OFF. For
more details about the installation, please refer
to the installation guide for the lower input tray.
L
After installation, you can select the lower input
tray to be used for the following:
–
tray to be used for the following:
–
Paper input tray setting for faxing (feature
#440 on page 70).
#440 on page 70).
–
Paper input tray setting for copying (feature
#460 on page 73).
#460 on page 73).
–
Paper input tray in PCL (feature #760 on page
75).
75).
–
Paper input tray setting for the scan to email
print feature (feature #565 on page 80).
print feature (feature #565 on page 80).
L
To use the lower input tray with your computer,
you need to change the printer properties. See
page 86 for details.
you need to change the printer properties. See
page 86 for details.