Panasonic KX-MB3010 User Manual
5. Copier
35
5.1.2 Using the automatic document feeder
1
If the {Copy} light is OFF, turn it ON by pressing
{
{
Copy}.
2
Set the original (page 18).
3
If necessary, change the resolution and contrast
according to the type of document.
according to the type of document.
L
To select the resolution, see page 34.
L
To select the contrast, see page 34.
4
If necessary, enter the number of copies (up to 99).
5
{
Start}
L
If the copy input tray prompt (feature #471 on
page 63) is activated, select the desired
recording paper size by pressing {V} or {^}
repeatedly, then press {Start} again.
page 63) is activated, select the desired
recording paper size by pressing {V} or {^}
repeatedly, then press {Start} again.
L
The unit will start copying.
6
Note:
L
To stop copying, see page 73.
5.2 More copying features
L
Make sure that the {Copy} light is ON.
5.2.1 Zoom copy (enlargement / reduction)
1
Set the original (page 17).
2
Press {Zoom} repeatedly to select the zoom rate
that fits the size of your document and recording
paper.
–
that fits the size of your document and recording
paper.
–
“
ZOOM =100%”
–
“
50%”
–
“
200%”
*1 Press {V} or {^} repeatedly to change the zoom
rate by 1 % at a time from “
25%” to “400%”.
You can also enter the desired percentage
specifically by using the dial keys.
specifically by using the dial keys.
L
Additional zoom rates can be selected according
to the recording paper size setting (feature #380
on page 57 or feature #382 on page 57).
to the recording paper size setting (feature #380
on page 57 or feature #382 on page 57).
3
{
Set}
4
If necessary, enter the number of copies (up to 99).
i {Start}
i {Start}
5
After you finish copying, press {Stop} to reset this
feature.
feature.
Note:
L
Zoom copy is not available for the following features:
–
–
Quick ID copy feature (page 37)
–
Easy repeat feature (page 37)
–
Poster feature (page 38)
–
N in 1 feature (page 38)
–
Separate N in 1 feature (page 39)
–
Booklet feature (page 39)
L
You can hold the previous zoom setting (feature #468
on page 63).
on page 63).
L
When using the scanner glass, the unit will only
enlarge the right top corner of the document starting
from the m mark on the unit.
enlarge the right top corner of the document starting
from the m mark on the unit.
L
When using the automatic document feeder, the
unit will only enlarge the center of the upper part of
the document. To make an enlarged copy of the
bottom of the document, turn the document around,
and then make a copy.
unit will only enlarge the center of the upper part of
the document. To make an enlarged copy of the
bottom of the document, turn the document around,
and then make a copy.
{
Start}
{
Copy}
{
Stop}
{V}{^}
Feature #380/#382
setting
setting
Additional zoom rate
“
LETTER”
“
A4>LTR”
“
LGL>LTR”
“
A4”
“
LTR>A4”
“
LGL>A4”
“
LEGAL”
–