Panasonic KX-FPG381 User Manual
8. Programmable Features
70
transmission, the unit will return to the previous
setting.
“ERROR” (default): When the previous fax
transmission fails and you wish to re-send the
document automatically.
“OFF”: Deactivates this feature.
setting.
“ERROR” (default): When the previous fax
transmission fails and you wish to re-send the
document automatically.
“OFF”: Deactivates this feature.
Note:
L
This feature is not available for broadcast
transmission.
transmission.
L
The calling charge may be higher as the
transmission speed is slowed down.
transmission speed is slowed down.
Code #25: Sending a fax at a specific time
DELAYED SEND
MODE=OFF
MODE=OFF
[
±]
This feature allows you to take advantage of low-
cost calling hours offered by your telephone
company. This feature can be set up to 24 hours
in advance of the desired time.
To send a document:
cost calling hours offered by your telephone
company. This feature can be set up to 24 hours
in advance of the desired time.
To send a document:
1. Insert the document.
2. Press {MENU}.
3. Press {#} then {2}{5}.
4. Press {A} or {B} repeatedly to select “ON”.
5. Press {SET}.
6. Enter the fax number.
7. Press {SET}.
8. Enter the transmission start time.
L
Press {*} repeatedly to select “AM” or
“PM”.
“PM”.
9. Press {SET}.
10. Press {MENU}.
Note:
L
To cancel after programming, press {STOP}
then {SET}.
then {SET}.
Code #26: Setting the Caller ID list to print
automatically
automatically
AUTO CALL. LIST
MODE=OFF
MODE=OFF
[
±]
“ON”: The Caller ID list will be printed
automatically each time the base unit logs 50
different callers (page 40).
“OFF” (default): The Caller ID list will not be
printed, but the unit will keep a record of the
information for the last 50 different callers.
automatically each time the base unit logs 50
different callers (page 40).
“OFF” (default): The Caller ID list will not be
printed, but the unit will keep a record of the
information for the last 50 different callers.
Code #31: Activating the Distinctive Ring
feature
feature
DISTINCTIVE RING
MODE=OFF
MODE=OFF
[
±]
See page 56 for details.
Code #32: Setting the ring pattern for fax
(Distinctive Ring feature)
(Distinctive Ring feature)
FAX RING PATTERN
RING=B–D
RING=B–D
[
±]
See page 57 for details.
Code #34: Setting the quick scan
QUICK SCAN
MODE=OFF
MODE=OFF
[
±]
This feature is helpful when you want to remove
the document for other uses, because the unit
will release the document before sending or
copying.
“ON”: The unit will scan the document and store it
into memory first, then the unit will start sending
or copying.
“OFF” (default): Deactivates this feature.
the document for other uses, because the unit
will release the document before sending or
copying.
“ON”: The unit will scan the document and store it
into memory first, then the unit will start sending
or copying.
“OFF” (default): Deactivates this feature.
Note:
L
If the document exceeds the memory
capacity, sending of the whole document or
copying of the exceeded document will be
canceled and this feature will be turned OFF
automatically.
capacity, sending of the whole document or
copying of the exceeded document will be
canceled and this feature will be turned OFF
automatically.
Code #36: Receiving oversized documents
RCV REDUCTION
MODE=92%
MODE=92%
[
±]
If the size of the document sent by the other
party is as large as or larger than the recording
paper, the unit can reduce the document and
print it. Select the desired reduction rate.
party is as large as or larger than the recording
paper, the unit can reduce the document and
print it. Select the desired reduction rate.
Code #39: Changing the base unit display
contrast
contrast
LCD CONTRAST
MODE=NORMAL
MODE=NORMAL
[
±]
“NORMAL” (default): For normal contrast.
Setting
Recording
paper size
paper size
Original
document
size
document
size
100%
Legal
Letter, A4
A4
Letter
92%
(default)
(default)
Letter
Letter
Legal
Legal
A4
A4
86%
Letter
A4
72%
Letter
Legal
A4
Legal
0519_FPG381.book Page 70 Monday, May 19, 2003 6:46 PM