Panasonic DP-6010 User Manual

41

NOTE

■

■

■

■

■ Procedure

∗

Initial setting (Factory setting) can be changed by the function mode.
(See page 62)

∗∗

If a part of the copied image is missing when using the Margin mode,
change the Margin Reduction setting to Yes. (See page 62)

C To reset each menu mode, touch the CANCEL button on the touch panel.

# When the vertical and horizontal void areas are the

same, adjust the void width by using the F·G buttons,
then touch the OK button.

# When the vertical and horizontal void areas are

different, select vertical or horizontal edge.

$ Adjust each void width by using the F·G buttons.
% Touch the OK button.

∗

Initial setting (Factory setting): 5 mm

# Adjust void width by using the F·G buttons.
$ Touch the OK button.

∗

Initial setting (Factory setting): 20 mm

# Select the Margin area.
$ Adjust void width by using the F·G buttons.

The image is moved only by the void width which has
been set.

**

% Touch the OK button.

∗

Initial setting (Factory setting): 10 mm

5

Press
START

1

Place the
Original(s)

2

Select ZOOM/
EFFECT Mode

3

Select Edge, Book or
Margin

4

Number
of Copies

P040-041_4510(pb).p65

7/31/02, 10:44 AM

41