Panasonic DP-8060 User Manual

7

Never open or remove machine covers that
are secured with screws unless specifically
instructed in the “Operating Instructions”. A high-
voltage component can cause electric shocks.

Do not try to alter the machine configuration or
modify any parts. An unauthorized modification
can cause smoke or fire.

Never throw a toner cartridge into an open
flame. Toner remaining in the cartridge can
cause an explosion and you can get burnt.

Never throw toner or a waste toner container
or a toner cartridge into an open flame. It can
cause an explosion and you can get burnt.

Keep button batteries/stamp out of the reach of
children. If a button battery/stamp is swallowed
accidentally, get medical treatment immediately.

Do not touch areas where these caution labels
are attached to, the surface may be very hot
and may cause severe burns.

Do not place any liquid container such as a
vase or coffee cup on the machine. Spilt water
can cause fire or shock hazard.

Do not place any metal parts such as staples
or clips on the machine. If metal and flammable
parts get into the machine, they can short-circuit
internal components, and cause fire or electric
shocks.

If debris (metal or liquid) gets into the machine,
switch Off and unplug the machine. Contact
your Service Provider. Operating a debris-
contaminated machine can cause fire or electric
shock.

Never touch a labelled area found on or near
the heat roller. You can get burnt. If a sheet of
paper is wrapped around the heat roller, do
not try to remove it yourself to avoid injuries or
burns. Switch Off the machine immediately, and
contact your Service Provider.

Do not use conductive paper, e.g. folding paper,
carbonic paper and coated paper. When a paper jam
occurs, they can cause a short circuit and fire.

Do not place any heavy objects on the machine.
An off-balance machine can tip-over or the heavy
object can fall, causing damage and/or injuries.

Keep the room ventilated when using the
machine for an extended period of time to
minimize the ozone density in the air.

When copying with the document cover open,
do not look directly at the exposure lamp. Direct
eye exposure can cause eye fatigue or damage.

Pull out paper trays slowly to prevent injuries.

When removing jammed paper, make sure that
no pieces of torn paper are left in the machine.
A piece of paper remaining in the machine can
cause fire. If a sheet of paper is wrapped around
the heat roller, or when clearing a jammed
paper that is difficult or impossible to see, do
not try to remove it by yourself. Doing so can
cause injuries or burns. Switch Off the machine
immediately, and contact your Service Provider.

■ When clearing a paper jam or other fault, follow the

appropriate procedure given in the Operating Instructions.

Do not place the machine near heaters or
volatile, flammable, or combustible materials
such as curtains that may catch fire.

Do not place the machine in a hot, humid, dusty
or poorly ventilated environment. Prolonged
exposure to these adverse conditions can
cause fire or electric shocks.

Place the machine on a level and sturdy surface
that can withstand a weight of 302 lb (DP-8060/
8045) / 295 lb (DP-8035). If tilted, the machine
may tip-over and cause injuries.

When relocating the machine, contact your
Service Provider.

When moving the machine, be sure to unplug
the power cord from the outlet. If the machine is
moved with the power cord attached, it can
cause damage to the cord which could result
in fire or electric shock.

Do not place a magnet near the safety switch
of the machine. A magnet can activate the
machine accidentally, resulting in injuries.

Do not use a highly flammable spray or solvent
near the machine. It can cause fire.

When copying a thick document, do not use
excessive force to press it against the platen
glass. The glass may break and cause injuries.