Seiko Group FB300 User Manual
41
Setup Parameter
Values
Description
PARK MODE
immediate
manual imm.
When pressing the PARK key or receiving a park command, the printer
immediately parks the paper.
immediately parks the paper.
When pressing the PARK key, the printer automatically parks the
paper. When receiving a park command via software:
paper. When receiving a park command via software:
1. If the current page is not empty (there is printing data or paper
movement commands have been issued), a form feed is performed.
2. The paper is moved to the tear-off position.
3. The P1, P2, P3 and P4 leds blink.
4. When the ON LINE key is pressed the printer parks the paper.
after tear
When pressing the PARK key or receiving a park command via
software:
software:
1. If the current page is not empty (there is printing data or paper
movement commands have been issued), a form feed is
performed.
performed.
2. The paper is moved to the tear-off position.
3. The P1, P2, P3 and P4 leds blink.
4. When the ON LINE key is pressed the printer parks the paper.
TEAR MODE
auto 1s, auto 2s,
auto 3s, auto 4s,
auto 5s, manual,
no tear/reverse
auto 3s, auto 4s,
auto 5s, manual,
no tear/reverse
Selects the way the tear mode is performed. Selecting
auto 1s,
auto 2s, auto 3s, auto 4s,
or auto 5s
, the printer moves
the paper in the tear-off position and back to the printing position after
the corresponding number of seconds. Selecting manual, the tear-off is
performed manually, pressing the ON LINE key. Selecting
the corresponding number of seconds. Selecting manual, the tear-off is
performed manually, pressing the ON LINE key. Selecting
no tear/
reverse
, the printer does not perform the tear-off function (this is
useful, when printing on labels).