Toshiba 170F User Manual
163
Press:
+
+
+
+
Select “2.OFF” by pressing:
If the ECM default setting is
set to ON, it is always effec-
tive for communications on
your facsimile (see page 59).
set to ON, it is always effec-
tive for communications on
your facsimile (see page 59).
You can turn the ECM OFF for
a single transmission using
this procedure. The facsimile
will automatically return to its
default status immediately af-
ter that transmission is com-
plete.
a single transmission using
this procedure. The facsimile
will automatically return to its
default status immediately af-
ter that transmission is com-
plete.
NOTES:
• If ECM is set to “OFF” in
the default setting proce-
dure, this procedure is not
applicable and the fac-
simile will warn you with
an error message, “NOT
ALLOWED NOW.”
dure, this procedure is not
applicable and the fac-
simile will warn you with
an error message, “NOT
ALLOWED NOW.”
• You can change the set-
ting even when a docu-
ment is not set on the
Document Support. The
setting becomes invalid if
no keys are pressed for
about 60 seconds.
ment is not set on the
Document Support. The
setting becomes invalid if
no keys are pressed for
about 60 seconds.
Display the SET
ECM Menu
ECM Menu
1
Select the ECM
Option
Option
2
JAN-31 09:43 AM 100%
ENTER TEL NUMBER
Disabling ECM Temporarily
MENU
The following screen is dis-
played. You may dial the re-
mote facsimile for your com-
munication job. The display will
return to the Standby Mode in
about 60 seconds if no keys
are pressed.
played. You may dial the re-
mote facsimile for your com-
munication job. The display will
return to the Standby Mode in
about 60 seconds if no keys
are pressed.
2.OFF
ECM
1.ON