Toshiba 170F User Manual

When the correct number is
displayed, press:

START

The Abbreviated Dial Number
and the name of the party will
appear on the LCD display for
about 2 seconds.

Your facsimile will automatical-
ly start scanning the document
into memory (if enabled). While
scanning, the facsimile dials,
connects, and starts transmis-
sion.

Once an Abbreviated Dial Num-
ber is programmed with a valid
remote facsimile location, that
location can be accessed by
recalling the corresponding Ab-
breviated Dial Number.

The document must be loaded
and the resolution and contrast
set before a transmission using
Abbreviated Dialing (see pages
83 and 84).

Press:

SPEED DIAL

ALPHA

+

Enter the Abbreviated Dial
Number (1 to 999) assigned to
the desired party.

•

When an incorrect num-

ber is entered, use 

to delete preceding dig-

its, or press 

STOP

 once

to start over from the be-
ginning.

•

Any leading zero (0) can
be omitted from the Ab-
breviated Dial Number.

Example of Abbreviated Dial
Number, 10:

Displayed for 2 seconds

During scan to memory

During transmission

When the number entered
(within the range of 1
through 999) is not prepro-
grammed with a specific
party’s facsimile or tele-
phone number, the mes-
sage “NUMBER NOT LIST-
ED” is displayed for 2 sec-
onds and then the facsimile
returns to the screen in
Step 1.

Displayed for 2 seconds

ABB. NUMBER
(1-999)       [   ]

ABB. NUMBER
(1-999)       [ 10]

SCANNING DOC   P001
FILE NBR =      091

ABB. NBR=         10
LONDON OFFICE

JAN-31 09:43 AM  99%
        AUTO RECEIVE

ABB. NBR=         10
NUMBER NOT LISTED