Toshiba 165 User Manual

34    Preparation 1 - Turning Power ON

To reduce power consumption, the equipment automatically enters into the energy saving mode 
when a specified period of time has passed since its last use. You can also turn the equipment 
into this mode manually.

y

The period of time at which the equipment enters into this mode is set at 30 minutes at the 
shipment from the factory.

y

The power consumption during this mode is set at 6 W or less. (When the Network Printer Kit 
is installed, or when the equipment is connected to a PC with a USB cable, the power con-
sumption during this mode is set at 39 W or less.)

Press the [ENERGY SAVER] button on the control panel.

The equipment is now in the energy saving mode. The display on the LCD screen goes off and 
the [ENERGY SAVER] lamp is lit.

When the Network Printer Kit (optional) is installed, or when this equipment is connected to a PC 
with a USB cable, “Sleep mode” appears on the LCD screen. In these cases, the [ENERGY 
SAVER] lamp is not lit.

If the [ENERGY SAVER] lamp is lit, press this button.
If “Sleep mode” is displayed on the LCD screen, press any button other than the [ENERGY 
SAVER] button on the control panel.

The energy saving mode can be also cancelled under the following conditions:

y

When the Platen Cover (optional) or the Reversing Automatic Document Feeder / Automatic 
Document Feeder (optional) is raised 

y

When this equipment is connected to a PC with a USB cable

y

When Fax data are received

When the Network Printer Kit (optional) is installed, or when this equipment is connected to a PC 
with a USB cable, the energy saving mode can be cancelled when print data are received.