Epson XP-600 User Manual

Notices

■

If the touch panel is damaged, contact Epson. If the liquid crystal solution gets on your hands, 
wash them thoroughly with soap and water. If the liquid crystal solution gets into your eyes, 
flush them immediately with water. If discomfort or vision problems remain after a thorough 
flushing, see a doctor immediately.

■

Use only compatible memory cards (see the User’s Guide for a detailed list).

■

Do not remove a memory card or turn off the product while the memory card light is flashing.

■

Do not use this product inside medical facilities or near medical equipment. Radio waves from 
the product may adversely affect the operation of medical equipment.

■

Do not use this product near automatically controlled devices such as automatic doors or fire 
alarms. Radio waves from this product may adversely affect these devices.

■

To avoid adversely affecting the operation of the following equipment and causing an accident, 
do not use the product: near medical equipment in a medical facility; within 8.7 inches (22 cm) 
of a cardiac pacemaker; near automatically controlled devices, such as automatic doors or fire 
alarms.

■

Keep ink cartridges out of the reach of children and don’t allow them to drink the ink.

■

Be careful when you handle used ink cartridges; there may be ink remaining around the ink 
supply port. If ink gets on your skin, wash it off thoroughly with soap and water. If it gets in 
your eyes, flush them immediately with water. If you still have discomfort or vision problems, 
see a doctor immediately. If ink gets in your mouth, spit it out and see a doctor right away.

■

Do not put your hand inside the product or touch any cartridges during printing.

■

Do not try to move the print head by hand, or you may damage the product.

■

Do not touch the green IC chip on the side of the cartridge. This may prevent normal 
operation.

■

Before transporting the product, make sure the print head is in the home (far right) position 
and the ink cartridges are in place.

■

Install a new ink cartridge immediately after removing a used one. Leaving cartridges 
uninstalled can dry out the print head and may prevent the product from printing.

■

Do not dismantle an ink cartridge. This could damage the print head.

■

Use the ink cartridge before the date printed on its package.

■

If you remove an ink cartridge for later use or disposal, make sure you put the cap back on the 
cartridge’s ink supply port to prevent ink from drying out or to prevent surrounding areas from 
getting smeared by ink.