JVC 0110SKH-MW-MT User Manual

Operation guide
Shows the buttons for each 
operation.

•  The menu automatically disappears in about 30 seconds after the previous operation.
•  Some items may not appear on the menu depending on the input or the input signal.
•  The items controlled by the MAKE system do not appear on the menu.

Settings for the audio output balance, EMBEDDED AUDIO signals and level meter

Item

To do

Setting value

Adjust the balance between the right and left speakers.

L5 – L1, 0, R1 – R5

Select the video input which the audio signal through 
AUDIO ASSIGN (IN 1) terminal is assigned to.

SDI-1, SDI-2, DVI, COMP/
RGB, VIDEO-1, VIDEO-2

Select the video input which the audio signal through 
AUDIO ASSIGN (IN 2) terminal is assigned to.

E.AUDIO GROUP*

Select the audio channel group of the EMBEDDED AUDIO 
signals.

☞ “NOTE”

LEVEL METER 
SETTING*

Adjust the level meter display for the EMBEDDED AUDIO 
signals.

☞ “NOTE”

Select how the audio channels are displayed on the level 
meter.

OFF, LINE (Displays 
the channels 1 – 6 at 
the left of the screen 
and 7 – 12 at the right.), 
DIVIDE (Displays the odd 
channels at the left of 
the screen and the even 
channels at the right.)

Select the color of the level meter display.

3COLORS (3 colors to 
indicate variations in input 
levels), W.100 (white)

Select the standard input level indicated on the level meter.

–20dB, –18dB

Select the input level’s lower limit indicated in red for the 
“3COLORS” display.

–10dB, –8dB, –6dB, 
–4dB, –2dB

Select the brightness of the level meter.

LOW, HIGH

Activates/deactivates the peak hold function of the level 
meter.

OFF, ON

The setting values and selectable audio channels of EMBEDDED AUDIO signals are as follows.

(G means GROUP)
1G: 

channel(s) 1/2/3/4/1+2/3+4/1 – 4 (1G)

2G: 

channel(s) 5/6/7/8/5+6/7+8/5 – 8 (2G)

1-2G: 

channel(s) 1/2/3/4/5/6/7/8/1+2/3+4/5+6/7+8/1 – 4 (1G)/5 – 8 (2G)/1 – 8 (1G+2G)

3G: 

channel(s) 9/10/11/12/9+10/11+12/9 – 12 (3G)

1-3G: 

channel(s) 1/2/3/4/5/6/7/8/9/10/11/12/1+2/3+4/5+6/7+8/9+10/11+12/1 – 4 (1G)/5 – 8 (2G)/

9 – 12 (3G)/1 – 8 (1G+2G)/1 – 12 (1-3G)

Example of the level meter display —Level meter position and audio channels

Ex.: When “LEVEL METER ch” is set to “LINE” and “BAR TYPE” is set to “3COLORS”

OVER LEVEL

REFERENCE LEVEL

Yellow

Green

Red

•  The level meter with no audio signal input is displayed in white for “3COLORS”, and in gray for “W.100.”
•  You can select the position of the level meter display—top or bottom of the screen (

☞ “POSITION” in 

“INFORMATION” on page 18).

•  When “PEAK HOLD” is set to “ON,” the maximum level meter value will remain displayed for a set period of 

time. (At the time the signal input level reaches the highest value.)

Adjustment bar
Displayed when selecting 
“BALANCE.”

For the operation procedure, see page 7.

DT-V24G1_20L3G_EN.indd   14

DT-V24G1_20L3G_EN.indd   14

10.1.15   3:22:21 PM

10.1.15   3:22:21 PM