LaCie 131081 User Manual

LaCie 324i LCD Monitor                                                                                          

Introduction

User Manual                                                                                                         

page 10

The monitor’s LCD stand is secured during transport by a block-
ing screw near the base of the stand. Please follow the procedure 
below to remove it.

 If the blocking screw is removed while the product 

is on its side or unsecured, the stand may suddenly extend with 
force. Uncontrolled extension could cause the monitor to strike 
the handler or to fall, resulting in personal injury or damage to 
the product.

1.  Take the monitor out of the box and remove the cushioning 

material. Do not remove the blocking screw yet (

). 

2.  Place the monitor on a desk or other horizontal surface. 

3.  Peel off the seal and remove the blocking screw.

1.4.1. The Blocking Screw and Transporting 

the 324i

Be sure to keep the blocking screw in an easily accessible loca-
tion. You will need to reinsert it into the 324i when transporting 
the display.

When transporting the monitor:

1.  Adjust the 324i to its lowest position.

2.  Insert the blocking screw into the stand base to lock it in place.

3.  Insert the 324i into the included cushioning material.

4.  Carefully place the 324i into its box.

Fig. 01