LaCie 131081 User Manual

LaCie 324i LCD Monitor                                                                          

Getting Connected

User Manual                                                                                                         

page 14

Make certain that the power is off on your LaCie 324i monitor 
and computer before attaching the cables.

2.1.1. Cable Management 

To keep the cables neatly organized, place them into the cable 
manager on the back of the LCD stand (

slack in the cables from the cable manager to the monitor in-
puts/outputs. If the cable lengths are too tight, the ends may  tug 
at their connections when changing from Landscape to Portrait 
modes.

2.1.2. Display and Video Signals

Connect the monitor and video signal cables (

a.  For a PC or Mac with DVI output:

 

✦

Connect the DVI signal cable (included) to the DVI connector 
on your computer. Connect the other end of the DVI cable to 
the monitor’s DVI input. Tighten all screws.

b.   For a PC or Mac with DisplayPort output:

 

✦

Connect the DisplayPort signal cable (not included) to the Dis-
playPort output on your computer. Connect the other end of 
the DisplayPort cable to the monitor’s DisplayPort input.

c.  For a source with HDMI output:

 

✦

Connect the HDMI signal cable (not included) to the HDMI 
output  on your video source. Connect the other end to the 
monitor’s HDMI input.

d.  For a source with Component video output:

 

✦

Connect the Component signal cable (not included) to the 
Component output on your video source. Connect the other 
end to the monitor’s Component input (RCA type connectors). 
Please note the color of each cable end when making the 
connections.

 Up to four video sources can be connected 

to the monitor at the same time: DVI, DisplayPort, HDMI, and 
Component video. You may view two video sources at the same 
time when using the 324i Picture-in-Picture (PiP) function.

Fig. 02

a 

b

c 

d 

Fig. 03