Sony FWD-42B2 User Manual
36
GB
If any of the following items is not set or not set
correctly, an error message appears, and test mail
cannot be sent:
• Target address
• Mail account address and mail server address
correctly, an error message appears, and test mail
cannot be sent:
• Target address
• Mail account address and mail server address
(SMTP)
Advanced
Gives access to advanced settings to enable use of
various applications on the network. Make the settings
as required by the respective application.
Gives access to advanced settings to enable use of
various applications on the network. Make the settings
as required by the respective application.
Advertisement
Lets you make settings for the Advertisement and
Broadcast functions on the network.
Lets you make settings for the Advertisement and
Broadcast functions on the network.
ID Talk
Lets you make settings for the ID Talk function. ID
Talk is a protocol that allows network-based control of
the display. Controlled items includes various settings
and adjustments such as color temperature and
gamma. For information about supported ID Talk
commands, contact your local Sony dealer.
Lets you make settings for the ID Talk function. ID
Talk is a protocol that allows network-based control of
the display. Controlled items includes various settings
and adjustments such as color temperature and
gamma. For information about supported ID Talk
commands, contact your local Sony dealer.
SNMP
The display is a network equipment which supports
SNMP (Simple Network Management Protocol).
Besides standard MIB-II, Sony Enterprise MIB is also
supported. This screen allows making settings for
SNMP.
For information about supported SNMP commands,
contact your local Sony dealer.
The display is a network equipment which supports
SNMP (Simple Network Management Protocol).
Besides standard MIB-II, Sony Enterprise MIB is also
supported. This screen allows making settings for
SNMP.
For information about supported SNMP commands,
contact your local Sony dealer.
Returning to default settings
To reset all settings made on the “Setup” screen to the
factory default condition, reset to the default settings
by assigning the “All Reset” setting, and then assign
the appropriate settings of the network again.
To reset all settings made on the “Setup” screen to the
factory default condition, reset to the default settings
by assigning the “All Reset” setting, and then assign
the appropriate settings of the network again.
Note