Polycom 4000 User Manual

Page of 1183
RealPresence Collaboration Server (RMX) 1500/1800/2000/4000 Administrator’s Guide 
Polycom®, Inc. 
287
To enable ISDN/PSTN participants to dial in to the Entry Queue, an ISDN/PSTN dial-in number must be 
assigned to the Entry Queue. Up to two dial-in numbers can be assigned to each Entry Queue. The dial-in 
numbers must be allocated from the dial-in number range defined in the ISDN/PSTN Network Service. You 
can allocate the two dial-in numbers from the same ISDN/PSTN Network Service or from two different 
ISDN/PSTN Network Services. The dial-in number must be communicated to the ISDN or PSTN dial-in 
participants.
The Entry Queue can also be used as part of the Gateway to Polycom® RealPresence DMA solution for 
connecting Audio only PSTN, ISDN, SIP and H.323 endpoints to RealPresence DMA™ system.
For more information, se
.
Default Entry Queue properties
The system is shipped with a default Entry Queue whose properties are shown in the following table.
Defining a New Entry Queue
You can modify the properties of the default Entry Queue and define additional Entry Queues to suit different 
conferencing requirements.
Collaboration Server 1800 does not support:
ISDN connections
Video Switching Conferencing Mode
Default Entry Queue Properties
Parameter
Value
Display Name
DefaultEQ
The user can change the name if required.
Routing Name
DefaultEQ
The default Routing Name cannot be changed.
ID
1000
Profile name
Factory_Video_Profile. Profile Bit Rate is set to 384 Kbps.
Entry Queue Service
Entry Queue IVR Service. This is default Entry Queue IVR Service shipped with the 
system and includes default voice messages and prompts in English.
Ad Hoc
Enabled
Cascade
None (Disabled)
Enable ISDN/PSTN 
Access
Disabled. You can modify the properties of this Entry Queue to enable ISDN/PSTN 
participants to dial-in to a conference. Up to two dial-in numbers can be assigned.