Samsung SF-3100 User Manual
Care and Maintenance
7-11
Chapter 7
Adjust
Shading
The shading is adjusted at the factory. If, however, you drop
and damage your machine while moving, we recommend you
adjust shading for optimized lightness.
and damage your machine while moving, we recommend you
adjust shading for optimized lightness.
To adjust Shading, do as follows:
1
Load a plain WHITE sheet of paper (no writing
or graphics) into the loading slot.
•
BE CAREFUL !
Printing quality may be unexpectedly worse if you do
not use a plain WHITE paper for the adjustment.
not use a plain WHITE paper for the adjustment.
2
Press Setup and find ‘MAINTENANCE’ by
pressing ➛ or ❿.
3
Press Start/Enter and scroll to ‘ADJUST
SHADING’ by pressing ➛ or ❿.
4
Press Start/Enter.
The machine starts to scan the document to
adjust Shading, and it displays ‘SHADING...’. If
there’s no document loaded, the display prompts
you ‘LOAD WHITE DOC.’ with a beep. Insert a
WHITE paper and press Start/Enter to start it.
After feeding the document, it returns to Standby
Mode.
adjust Shading, and it displays ‘SHADING...’. If
there’s no document loaded, the display prompts
you ‘LOAD WHITE DOC.’ with a beep. Insert a
WHITE paper and press Start/Enter to start it.
After feeding the document, it returns to Standby
Mode.