Intel 31244 PCI-X User Manual
52
PCI-X Layout Guidelines
7.4.3
Connecting Intel
®
31244 PCI-X to Serial ATA Controller
to Single-Slot
shows one of the chipset PCI AD lines connected through W1 and W12 line segments, to
a single-slot connector through W13 line segment, to the GD31244. This AD line is also used as an
IDSEL line from line segment W14 to a 2K resistor through W15 to the PCI connector. The other
end of the PCI connector IDSEL line connects through W16 to GD31244 IDSEL line input buffer.
IDSEL line from line segment W14 to a 2K resistor through W15 to the PCI connector. The other
end of the PCI connector IDSEL line connects through W16 to GD31244 IDSEL line input buffer.
shows the wiring lengths for a single slot design. This design layout wiring lengths should
support PCI-X speeds. However, prelayout simulation is recommended.
.
•
Stublengths are represented by W#s
Note:
W14, W15 and W16 represent the IDSEL line. W14 and W15 <= 0.8”.
Figure 17.
Single-Slot Topology
A9126-01
W1
W11
W12
W14
W15
2K
W16
W13
Host
Slot 1
PCI Connector
14
13
19
18
17
16
15
12
2
1
10
11
Table 22.
Wiring Lengths for Single Slot
Segment
Lower AD Bus
Upper AD Bus
Units
Minimum Length Maximum Length
Minimum Length Maximum Length
W1
2.0
8
2
7
inches
W12
0.1
0.5
0.1
0.5
inches
W13
0.75
1.5
1.75
2.75
inches
W14
0.1
Note
N/A
N/A
inches
W15
Note
0.6
N/A
N/A
inches
W16
1.125
1.125
N/A
N/A
inches