Fujitsu DX410 S2/DX440 S2 User Manual
Chapter 9 Connectivity Management
9.2 Functions in the Action Area for Connectivity
9.2 Functions in the Action Area for Connectivity
ETERNUS Web GUI User’s Guide
Copyright 2013 FUJITSU LIMITED
P2X0-1090-10ENZ0
609
The procedure to set the SAS host QoS is as follows:
Procedure
1
Select the SAS host to set the bandwidth limit (multiple selections can be made), and click
[Set SAS Host QoS] in [Action].
[Set SAS Host QoS] in [Action].
2
Select the SAS host bandwidth limit, and click the [Set] button.
•
Bandwidth Limit
Select the maximum performance in IOPS (throughput value). If the bandwidth limit is not applied,
select "Unlimited".
Select the maximum performance in IOPS (throughput value). If the bandwidth limit is not applied,
select "Unlimited".
→ A confirmation screen appears.
3
Click the [OK] button.
→ The SAS host QoS setting starts.
•
Configure the port bandwidth limit on each port. Refer to the following sections for details:
- "9.2.7.9 Set FC Port QoS" (page 610)
- "9.2.7.10 Set iSCSI Port QoS" (page 611)
- "9.2.7.11 Set SAS Port QoS" (page 613)
- "9.2.7.12 Set FCoE Port QoS" (page 614)
- "9.2.7.10 Set iSCSI Port QoS" (page 611)
- "9.2.7.11 Set SAS Port QoS" (page 613)
- "9.2.7.12 Set FCoE Port QoS" (page 614)
•
for details.