Tripp Lite B120-000-SL Leaflet

arranty

Registration:

y f

or a

chance to win a FREE

ipp Lite

product—www

.tr

ipplite

.com/w

arr

anty

DVI Single Link Active Extender

Model: B120-000-SL

1111 W. 35th Street, Chicago, IL 60609 USA

www.tripplite.com/support

Package Contents:

• B120-000-SL DVI Single Link Active Extender
• External Power Supply

(Input: 100-240V, 50/60Hz, 0.5A Output: 5V, 2A)

• Screwdriver for Equalization Adjustment
• Owner’s Manual

Owner’s Manual

Installation

Note: Test to make sure the entire installation works properly before pulling cables through ceilings/walls.

Connect the longer DVI-D Single Link cable between the source and the connector on the B120-000-SL labeled “Source.”

Note: For extension distances 100 ft. or more, use 24Awg DVI-D Single Link cable.

Connect the external power supply to the B120-000-SL, and then plug it into a Tripp Lite Surge Suppressor, Uninterruptible Power Supply

(UPS), or Power Distribution Unit (PDU). The Green LED will illuminate to indicate that the unit is receiving power.

Connect the shorter DVI-D Single Link cable between the monitor and the connector on the B120-000-SL labeled “Display.” The Orange

LED will illuminate to indicate that there is an active signal between the source and the monitor.

Note: The DVI-D Single Link cable connecting the monitor to the B120-000-SL must be no longer than 16 ft. (5 m.).

If necessary, use the equalization control to adjust the video image.

Note: An improper Equalization setting can result in no image being displayed at all. If no image is displayed on your monitor, try adjusting the Equalization.

Product Features:

• Supports a maximum video resolution of 1920 x 1080 @ 60Hz
• Extend a DVI-D video signal up to 150 ft. from the source
• Built-in Equalization control to adjust the video image
• HDCP compliant

COMPUTER

MONITOR

B120-000-SL