Sun Microsystems SL500 User Manual
Drive Management Tasks
102 SL500 User’s Guide • July 2008
Revision: KA • 96116
▼
Enable or Disable a Drive Port
Use this procedure to enable or disable a physical port on a drive.
1. Select Tools > System Detail.
2. Expand the Drive Folder, and click the drive you want to modify.
3. Click Properties.
4. Set the Port A Enabled or Port B Enabled status as follows:
■
True—Turns on the port.
■
False—Turns off the port; the communication channel between the host software and
the drive is disabled.
5. The network software automatically configures the Port (A or B) address. This is
called soft mode addressing.