Sun Microsystems SL500 User Manual
Partition Management Tasks
180 SL500 User’s Guide • July 2008
Revision: KA • 96116
▼
Make a Hardware Change to a Partitioned Library
Some library hardware changes, such as adding expansion modules, or adding CAP
cells, may require the removal of all or part of an existing partitioned module. Use the
following process to make such hardware changes without losing partitioning
information for the sections of the library that are unchanged.
Caution –
Failure to follow this procedure could result in the loss of library partition
configuration information after a hardware change.
1. De-allocate all library resources (storage cells, CAPs, and drives) that will be
removed as part of the hardware change from the partitions they are currently
allocated to.
See
See
for detailed instructions.
2. Power down the library.
See
for detailed instructions.
3. Install the hardware change.
4. Power up the library.
See
for detailed instructions.
All partition allocations for the unchanged parts of the library remain in effect.
5. Allocate the library resources that have been added due to the hardware change.
See
for detailed instructions.
Caution –
Reallocating resources can result in orphaned cartridges and data that could
be lost. See
for details.