Intel 1520 User Manual

Chapter 5 Using the Command-Line Interface

bottom field and press Enter. Finally, press CTRL-X to save your 
changes and return to the previous screen.

✔

To disable multicast communication, select disable multicast, and 
press Enter.

✔

To enable HTTP redirection, select enable HTTP, and press Enter.

✔

To disable HTTP redirection, select disable HTTP, and press Enter.

✔

To enable NNTP redirection, select enable NNTP, and press Enter.

✔

To enable NNTP redirection, select enable NNTP, and press Enter.

✔

To add a router, select add router, and press Enter. Doing so causes a 
field to appear. Supply the router IP and press Enter. Press CTRL-X to 
save your changes and return to the previous screen.

✔

To delete all routers, select delete routers, and press Enter.

▼ Viewing current WCCP options

Select the config menu, and press Enter. 

Select routing, and press Enter. 

Select wccp, and press Enter. 

Select view, and press Enter.

Configuring the Adaptive Redirection Module (ARM)

You can configure the ARM for transparent proxy caching, set bypass rules, and 
configure load-shedding options.

You can enable or disable transparent HTTP/NTTP.

▼ Enabling transparent redirection

Select the config menu, and press Enter. 

Select arm, and press Enter. 

Select nat, and press Enter. 

Select enable, and press Enter.

▼ Disabling transparent redirection

Select the config menu, and press Enter. 

Select arm, and press Enter. 

Select nat, and press Enter. 

Select disable, and press Enter.