Mitsubishi Electronics F940GOT-LWD-E User Manual
F940GOT-SWD-E/LWD-E
Maintenance 5.
5-3
5.2
Replacement of battery
When the battery voltage drops, the control devices for system information set by the screen cre-
ation software becomes ON. The control devices are interlocking with auxiliary relays in the PLC.
It is recommended to attach a lamp using the output of the PLC so that the ON/OFF status of the
7th bit can be monitored from the outside.
For the details of control devices, refer to the Operation Manual.
ation software becomes ON. The control devices are interlocking with auxiliary relays in the PLC.
It is recommended to attach a lamp using the output of the PLC so that the ON/OFF status of the
7th bit can be monitored from the outside.
For the details of control devices, refer to the Operation Manual.
Example :When the FX-PCS-DU/WIN are used.
When the head No. of the control devices is set to M0.
M6: Battery voltage drop Becomes ON when the battery voltage drops.
This control device is used in a sequence program as follows.
This control device is used in a sequence program as follows.
Example :When the SW1D5C-GOTR-PACK are used.
When the system information of the write device is set D20.
D24 b3: Battery voltage drop Becomes ON when the battery voltage drops.
This control device is used in a sequence program as follows.
This control device is used in a sequence program as follows.
M6
Y
Indication outside PLC
Battery voltage drop
M8000
M23
Y
Indication outside PLC
Battery voltage drop
M0V
D24 K1M20