Soyo 6KB82440 User Manual
Hardware Setup
9
PS/2 Mouse Connector
A six-pin female PS/2 mouse connector is located at the rear of the
board. Plug the mouse jack into this connector.
board. Plug the mouse jack into this connector.
IR – IR Connector
A ten-pin wafer connector is for connecting to the IR device. Use the
device that has the ASKIR or HPSIR specification and choose
ASKIR/HPSIR from the BIOS setup.
device that has the ASKIR or HPSIR specification and choose
ASKIR/HPSIR from the BIOS setup.
IR Connector
Pin Assignment
6 Empty
7 CIRRX
8 VSB
9 Empty
10 Empty
VCC 1
FIRRX 2
IRRX 3
GND 4
IRTX 5
There are two ways to use this IR function. One is to connect a 5-pin IR
device and treat it like an ordinary IR port. The other way is to connect a
10-pin IR device and use the advanced ÒIR Wake UpÓ PC function. Ask
your IR provider for the new ÒIR Wake UpÓ function.
device and treat it like an ordinary IR port. The other way is to connect a
10-pin IR device and use the advanced ÒIR Wake UpÓ PC function. Ask
your IR provider for the new ÒIR Wake UpÓ function.
Keylock & Power LED Connector
This connector is for a lock that may be installed on the system case for
enabling or disabling the keyboard. This connector also attaches to the
caseÕs Power LED. (Pin 1, 3 for power LED, pin 4, 5 for keylock.)
enabling or disabling the keyboard. This connector also attaches to the
caseÕs Power LED. (Pin 1, 3 for power LED, pin 4, 5 for keylock.)
SPK – Speaker Connector
Attach the system speaker to connector SPK.
RST – Hardware Reset Control
Attach the Reset switch to RST. Closing the Reset switch restarts the
system.
system.