Soyo 6KB82440 User Manual

Page of 46
24
BIOS Setup
Chipset Features Setup
The Chipset Features Setup option changes the values of the chipset
registers. These registers control system options in the computer.
Note: 
Change these settings only if you are familiar with the Chipset.
Run the Chipset Features Setup as follows.
1. Choose ÒCHIPSET FEATURES SETUPÓ from the Main Menu and
the following screen appears. (The screen below shows default
settings.)
ROM PCI/ISA BIOS
CHIPSET FEATURES SETUP
AWARD SOFTWARE, INC.
ESC : Quit     
↑  ↓  →  ←     
: Select Item
F1  : Help     PU/PD/+/– : Modify
F5  : Old Values (Shift)F2 : Color
F6  : Load BIOS Defaults
F7  : Load Setup Defaults
SDRAM CAS Latency Time    : 3
Spread Spectrum Modulated : Disabled
CPU Warning Temperature   : Disabled
Current CPU Temperature   : 27
o
C/80
o
F
Current System Temperature: 24
o
C/80
o
F
Current CPUFAN1 Speed     : 6553 RPM
3.3(V) : 2.78 V    VTT(V) : 1.50V
+12(V) : 11.84V    –12(V) : –11.45V
–5(V)  : –4.88V    
Auto Configuration       : Enabled
DRAM Speed Selection     : 60 ns
MA Wait State            : Slow
EDO RAS# To CAS# Delay   : 3
EDO RAS# Precharge Time  : 3
EDO DRAM Read Burst      : x3/3/3
EDO DRAM Write Burts     : x3/3/2
DRAM Data Integrity Mode : Non-ECC
CPU-TO-PCI IDE Posting   : Enabled
System BIOS Cacheable    : Disabled
Video BIOS Cacheable     : Disabled
Video RAM Cacheable      : Disabled
8 Bit I/O Recovery Time
: 3
16 Bit I/O Recovery Time : 2
Memory Hole At 15M-16M   : Disabled
Passive Release          : Enabled
Delay Transaction        : Disabled
AGP Aperture Size (MB)   : 64
SDRAM RAS-to-CAS Delay   : Slow
SDRAM RAS Precharge Time : Slow
2. Use the arrow keys to move between items and select values. Modify
selected fields using the PgUp/PgDn/+/Ð keys.
A short description of screen items follows:
Auto Configuration
Enable this option (strongly
recommended) and the system
automatically sets all options on the left
side of the screen (except cache update
mode & BIOS cacheable).
If this option is Enabled you must boot
from Turbo mode.
MA Wait State
Use the default setting.
EDO RAS# to CAS#
Delay
Use the default setting.