Contec SPI-8451-LLVA User Manual

6. RAID Controller 

42 

SPI-8451-LLVA, SPI-8452-LLVA, SPI-8451-LVA 

3.  Install the hard drives into the hard drive bays of your system, including the power cables. 

4.  Attach one Ultra ATA cable to each hard drive.    Then attach one cable to each of the IDE connector 

on the SPI-8451-LLVA board.    The colored edge of the cable(s) indicates pin 1, and the blue cable 
connector must be attached to the SPI-8451-LLVA connector. 

CAUTION

 

 

 

You must use an 80-wire, 40-pin cable when connecting an Ultra ATA66/100 hard drive to the 
SPI-8451-LLVA connector